Description
Opticap® XLT 30, inlet connection diam. 1.5 in., cartridge nominal length 30 in. (75 cm)
Properties
Product Name
Opticap® XLT 30 CapsuleMedia: Durapore® 0.22 µm, Chemistry: Hydrophilic Polyvinylidene Fluoride (PVDF)Inlet: 1-1/2 in. Sanitary FlangeOutlet: 1-1/2 in. Sanitary FlangeT-lineMax Operating Pressure: 80 psi @ 25 °C
material
PVDF , polypropylene , polypropylene housing, polypropylene support, polypropylene vent cap, silicone seal
reg. compliance
Meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
Quality Level 00
sterility non-sterile
sterilization compatibility autoclavable compatible
product line Opticap® XLT 30
feature hydrophilic
manufacturer/tradename Opticap®
parameter
≤40 mL/min air diffusion at 2.75 bar (40 psig) and 23 °C (in water), 1.0 bar max. inlet pressure (15 psi) at 80 °C, 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward), 2.8 bar max. inlet pressure (40 psi) at 60 °C, 25 °C max. inlet temp., 3.5 bar max. differential pressure (50 psid) at 25 °C (Reverse; intermittent), 5.5 bar max. differential pressure (80 psid) at 25 °C (Forward), 5.5 bar max. inlet pressure (80 psi) at 23 °C, 80 psig max. inlet pressure
technique(s) sterile filtration: suitable
L 87.1 cm (34.3 in.)
cartridge nominal length 30 in. (75 cm)
diam. 10.7 cm (4.2 in.)
filtration area 2.1 m2
inlet connection diam. 1.5 in.
inlet to outlet W 15.2 cm (6.0 in.)
outlet connection diam. 1.5 in.
impurities
≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction), <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
gravimetric extractables ≤75 mg/capsule
matrix Durapore®
pore size 0.22 μm
input sample type liquid
bubble point ≥3450 mbar (50 psig), air with water at 23 °C
fitting
1/4 in. drain/vent hose barb (with double O-ring Seal), (38 mm (1 1/2 in.) Sanitary Flange Inlet and Outlet)
