Description
Fittings 1-1/2 in. TC, Autoclavable
Synonym(s):
Opticap Autoclavable XLT 30 Millipore Express SHC 0.5/0.2 μm 1-1/2 in. TC, Opticap XLT 30 CapsuleMedia: Millipore Express SHC 0.5 / 0.2 µm
Properties
Product Name
Millipore Express® SHC, Opticap® XLT Capsule, Chemistry: Hydrophilic Polyethersulfone (PES)Inlet: 1-1/2 in. Sanitary FlangeOutlet: 1-1/2 in. Sanitary FlangeT-lineMax Operating Pressure: 80 psi @ 25 °C, Opticap® XLT, inlet connection diam. 1-1/2 in., pore size 0.5/0.2 μm, cartridge nominal length 30 in. (75 cm)
material
polyethersulfone membrane, polypropylene housing, polypropylene support, polypropylene vent cap, silicone O-ring, silicone seal
Quality Level
sterility
non-sterile
sterilization compatibility
autoclavable compatible
product line
Opticap® XLT
feature
hydrophilic
manufacturer/tradename
Millipore Express®
parameter
1.0 bar max. differential pressure (15 psi) at 80 °C, 1.0 bar max. inlet pressure (15 psi) at 80 °C, 2.1 bar max. differential pressure (30 psi) at 25 °C (Reverse; intermittent), 2.8 bar max. inlet pressure (40 psi) at 60 °C, 5.5 bar max. differential pressure (80 psi) at 25 °C, 5.5 bar max. inlet pressure (80 psi) at 25 °C, 6.9 bar max. differential pressure (100 psi) at 25 °C (Forward; intermittent), 6.9 bar max. inlet pressure (100 psi) at 25 °C (intermittent)
technique(s)
sterile filtration: suitable
cartridge nominal length
30 in. (75 cm)
device L
87.1 cm (34.3 in.)
filter diam.
10.7 cm (4.2 in.)
filtration area
1.47 m2
inlet connection diam.
1-1/2 in.
inlet to outlet W
15.2 cm (6.0 in.)
outlet connection diam.
1-1/2 in.
impurities
<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
matrix
Millipore Express® SHC
pore size
0.5/0.2 μm pore size
bubble point
≥4000 mbar (58 psig), air with water at 23 °C
fitting
38 mm (1 1/2 in.) inlet sanitary flange, 38 mm (1 1/2 in.) outlet sanitary flange
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
